Seq P3: Track Param (Track Parameters); 3-1: Midi T01-08; 3-2: Midi T09-16 - Korg Krome Parameter Manual

SEQ P3: Track Param (Track Parameters)

3–1: MIDI T01–08,
3–2: MIDI T09–16
3–1a
3–1b
3–1c
Here, you can make MIDI‐related settings for each MIDI track.
3–1(2)a:Location, Meter, Tempo, Tempo
Mode, Song Select, Track Select,
Reso, RPPR
3–1(2)b:Track Info
For more information, please see "0–1(2)a: Location, Meter,
Tempo, Tempo Mode, Song Select, Track Select, Reso, RPPR"
on page 109.
For more information, please see "2–1: Trim T01–08, 2–2:
Trim T09–16" on page 123.
3–1(2)c: MIDI
Track 01 (Track Number):
Status
This sets whether the Track controls the internal sounds,
external MIDI devices, or both.
When controlling external MIDI devices, it also allows you
to choose the internal Bank Select numbers (as set by the
front‐panel buttons), or use custom Bank Select settings to
match the external device.
Off: Use this to disable the Track. With this setting, the Track's
Program will not sound, and MIDI data will not be transmitted.
INT: The track will sound when you play back the
performance data recorded on the MIDI track. If you use
Track Select (Seq 0–1(2)a) to select a MIDI track that is set to
INT, the KROME's sound generator will produce sound
when played. MIDI data will not be transmitted to an
external device.
BTH: Both INT and EXT are operative. When the musical data
recorded in the MIDI track is played back, or when you select a
MIDI track that is set to BTH and play the controllers of the
KROME, the internal tone generator of the KROME will sound,
and MIDI data will also be transmitted to an external device.
EXT: When the musical data recorded in the MIDI track is
played back, or when you select a MIDI track that is set to
EXT and play the controllers of the KROME, MIDI data will
be transmitted to an external device, but the internal tone
generator of the KROME will not sound.
When you select another song or return to the beginning of
the song, the program change, volume, panpot, portamento,
sends 1 and 2, post IFX pan, and post IFX sends 1 and 2 of
each MIDI track set to EXT will be transmitted via MIDI.
SEQ P3: Track Param (Track Parameters) 3–1: MIDI T01–08, 3–2: MIDI T09–16
3–1
Menu
[Off, INT, BTH, EXT, EX2]
(See Global P1: MIDI, SEQ Mode "Track MIDI Out" on
page 200)
EX2: This enables you to specify a particular MIDI Bank
Select message for the Track, instead of automatically using
the Bank of the selected KROME Program. Use the
parameters below, labeled Bank Select MSB (When Status
=EX2), to set the Bank Select message as desired. In other
respects this is the same as EXT, described above.
MIDI data is transmitted and received on the MIDI
channel that is specified separately for each MIDI track
by the MIDI Channel.
Recorded data
Play Internal Sounds
internal
Status MIDI Out
Sounds
INT O X
EXT, EX2 X O
BTH O O
MIDI Channel
Specifies the MIDI channel that the MIDI track will use to
transmit and receive musical data. The MIDI channel you
specify here will be the receive channel when Status is INT,
the transmit channel when it is EXT or EX2, and the receive/
transmit channel when it is BTH. Tracks set to INT which
have the same MIDI channel will sound and be controlled
identically when they receive MIDI data or data from the
sequencer tracks.
Bank Select MSB (When Status=EX2) [000...127]
Bank Select LSB (When Status=EX2)
When Status is set to EX2, this sets the bank number that
will be transmitted. When Status is other than EX2, this
setting has no effect.
Track 02...08, 09...16 (Track Number):
These are the MIDI‐related settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see "Track 01 (Track Number):" above.
3–1(2): Menu Command
V
• 0: Memory Status see p. 163
• 1: Exclusive Solo see p. 64
• 2: Rename Song see p. 163
• 3: Delete Song see p. 163
• 4: Copy From Song see p. 163
• 5: Load Template Song see p. 163
• 6: Save Template Song (Save as User Template Song)
see p. 164
• 7: FF/REW Speed see p. 164
• 8: Set Location (Set Location for Locate Key)
• 9: GM Initialize see p. 165
• 10:Copy from Combination
11: Copy from Program see p. 167
For more information, please see "Sequencer: Menu
Command" on page 163.
Received MIDI data
internal
MIDI Out
Sounds
O ‐‐
X ‐‐
O ‐‐
[01...16]
[000...127]
see p. 164
see p. 166
125