0-5: Arpeggiator A, 0-6: Arpeggiator B - Korg Krome Parameter Manual

Combination mode
0–5: ARPEGGIATOR A,
0–6: ARPEGGIATOR B
0–5a
0–5b
0–5c
Here, you can make arpeggiator settings for the
combination. A combination can run two arpeggiators
simultaneously.
Arpeggiator parameters can be edited in P7: ARP/DT, but
certain major parameters can be edited in these pages as
well. You can edit these parameters in realtime, for example,
by changing the arpeggio pattern while playing in Combi
P0: Play.
You can also use the TEMPO knob and the arpeggio control
(ARP) GATE knob, VELOCITY knob, SWING knob, and
STEP knob to control the arpeggiator in realtime.
To save the edits you make, use Write Combination.
0–5(6)a: Combination Select, Tempo
Bank, Combination Number & Name
These are the bank, number, and name of the current
Combination. Here, you can also select a combination.
For more information, please see "0–1(2)a: Combination
Select" on page 70.
(Tempo)
For more information, please see " (Tempo)" on page 71.
0–5(6)b: ARP Controls
This shows the value of each parameter for the ARP
assignments of the REALTIME CONTROLS knobs.
[GATE]
[VEL. (Velocity)]
[SWING]
see p.6, p.54
[STEP]
see p.6
74
0–5
Menu
[040.00...300.00, EXT]
[–64...+00...+63]
[–64...+00...+63]
[–64...+00...+63]
[–64...+00...+63]
0–5(6)c: Arpeggiator Run A/B,
Timbre assign
Arpeggiator Run A, B
When the ARP button is on, the arpeggiator(s) you checked
here will run if they are assigned to a timbre by Arpeggiator
Assign (7–1(2)c).
When the arpeggiator is on, these check boxes let you turn A
and B on/off.
This parameter can also be set from P7: Arpeggiator/Drum
Track page Arpeggiator Run A, B.
Timbre assign
This indicates the arpeggiator A and B assignment status for
each timbre 1–8. These settings are made in Arpeggiator
Assign (7–1(2)c).
0–5(6)d: Arpeggiator A (B)
Pat (Pattern) [P0...P4, U0000(INT)...U0899(INT),
Octave
Resolution
Sort
Latch
Key Sync.
Keyboard
Set the various parameters of the combination arpeggiator.
For more information, please see "COMBI P7: ARP/DT
(Arpeggiator/Drum Track)" on page 91.
These parameters can also be set from 7–3(4): Arpeggiator
A(B) Setup.
0–5(6): Menu Command
V
• 0: Write Combination see p. 101
• 1: Exclusive Solo see p. 64
• 2: Auto Song Setup see p. 65
• 3: Copy from Program see p. 101
• 4: Copy Arpeggiator see p. 103
For more information, please see "Combination: Menu
Command" on page 101.
U0900(USER)...U1027(USER)]
[1, 2, 3, 4]
, ,
[ , , , ,
[Off, On]
[Off, On]
[Off, On]
[Off, On]
, ]