Korg Krome Parameter Manual page 170

Sequencer mode
converted to a song if settings such as the MIDI channel
do not match.
Using a foot switch to switch the Step
You can use a foot switch to switch the Step.
If you set to
Repeat
ASSIGNABLE SWITCH jack will control the timing at
which the song stops repeating. Set
(Global P2: Controllers page) to Cue Repeat Control.
Converting a cue list into a song
Although it is not possible to record additional material
onto tracks in a cue list, you can convert a cue list to a song,
and then record solos etc. on vacant tracks. You will also
need to convert a cue list to a song if you wish to save it to
external media as SMF data.
1. Select the menu command "Convert to Song".
A dialog box will appear.
2. In "To Song," specify the destination song number for
the converted data.
The cue list name will automatically be assigned as the song
name of the converted data. (For details and cautions
regarding Convert to Song, please see "Convert to Song
(Convert Cue List to Song)" on page 189.)
In the dialog box that appears, it is not necessary to specify
Set Length when selecting a new song as the conversion
destination. The number of measures in the converted song
will be used. Press the OK button, and the Convert Cue List
dialog box will appear.
3. Press the OK button.
The cue list will be converted into a song. Access the P0–1:
Play/REC page, select the song number that you specified as
the conversion destination, and check the results.
162
, a foot switch connected to the
FS
Foot Switch Assign
11–1: Menu Command
V
• 0: Memory Status see p. 163
• 1: Exclusive Solo see p. 64
• 2: Rename Cue List see p. 189
• 3: Delete Cue List see p. 189
• 4: Copy Cue List see p. 189
• 5: Convert to Song (Convert Cue List to Song)
189
• 6: Copy Song see p. 190
• 7: FF/REW Speed see p. 164
• 8: Set Location (Set Location for Locate Key)
For more information, please see "Sequencer: Menu
Command" on page 163.
see p.
see p. 164