Korg Krome Parameter Manual page 203

Aftertouch Curve (MIDI IN)
This specifies the way in which incoming aftertouch data
will affect the volume or tone when Convert Position
(Global 1–1a) is set to PostMIDI.
This setting has no effect when Convert Position
(Global 1–1a) is set to PreMIDI.
This curve is applied immediately before the tone generator.
The aftertouch Curve setting selects the curve that is
applied to the incoming aftertouch.
Aftertouch
effect
1, 2: This curve produces change when strong aftertouch
pressure is applied.
3 (Normal): The normal curve.
4, 5: This curve produces change even when light pressure is
applied.
6, 7: These curves produce change in 24 or 12 steps. Curve
number 7 allows change over twelve steps, so when using
aftertouch to modify the pitch, you can set the range of
modification to one octave, and use aftertouch to vary the
pitch in semitone steps.
8: This is a random curve. Use this when you wish to create
special effects, or to use aftertouch to apply unpredictable
modulation.
With a setting of aftertouch, the setting you make here
will be applied immediately before the KROME's
internal tone generator, meaning that it will affect the
data received via MIDI, but will not affect the
transmitted data.
0–1b: Effect Global SW
Enable IFX 1–5
Off (unchecked): All insert effects IFX1–5 will be off.
On (checked): The P8: Insert Effect settings for each IFX On/
Off in Program, Combination, and Sequencer modes will be
valid.
Enable MFX1&2
Off (unchecked): Master Effect1 and 2 (MFX1, 2) will be off.
On (checked): The P9: MFX/TFX/LFO setting MFX1 On/Off,
and MFX2 On/Off, in Program, Combination, and
Sequencer modes will be valid.
This on/off setting is linked with the front panel MASTER
FX button.
Enable TFX
Off (unchecked): Total effect (TFX) will be off.
On (checked): The P9: MFX/TFX/LFO setting TFX On/Off,
in Program, Combination, and Sequencer modes will be
valid.
This on/off setting is linked with the front panel TOTAL FX
button.
These settings will always be turned on when you
power‐on the KROME.
When Enable IFX, Enable MFX1&2, or Enable TFX
settings are switched, control change messages CC#92
(effect control 2), CC#94 (effect control 4), and CC#95
[1...8]
After Touch (MIDI In→TG)
MAX
5
4
7
3
2 8:RANDOM
6
1
0 127
[Off, On]
[Off, On]
[Off, On]
Global P0: Basic Setup 0–1: Basic
(effect control 5) will be transmitted respectively. The
transmitted data will be 0 for off, and 127 for on.
0–1c: ARP/Drum Track
All ARP/DT Off
On (checked): All arpeggiator and Drum Track functions
will be off. The arpeggiator will not operate even if the ARP
button is on. The Drum Track function will not operate even
if the DRUM TRACK button is on.
Off (unchecked): The arpeggiator settings and ARP button
settings in Program, Combination, and Sequencer modes
will be used. The Drum Track function will operate
according to the settings in each mode and the state of the
DRUM TRACK button.
Load ARP when changing:
Program
On (checked): When you switch programs, the arpeggiator
settings stored in that program will be used. Normally you
will use the On setting.
Off (unchecked): The arpeggiator settings will not change
even if you switch programs. Use this setting if you want to
switch Program sounds without changing the phrases from
the arpeggiator.
Combination
On (checked): When you switch combinations, the
arpeggiator settings stored in that combination will be used.
Normally you will use the On setting.
Off (unchecked): The arpeggiator settings will not change
even if you switch combinations. Use this setting if you want
only to switch combination sounds without changing the
phrases from the arpeggiator.
Mode, Stop Watch
See "a: Mode button" on page 4 of the Operation guide.
See "l: Stopwatch button" on page 5 of the Operation guide.
0–1: Menu Command
V
• 0: Write Global Setting
• 1: Load Preload/Demo Data
• 2: Change all bank references
• 3: Display Setup see p. 216
• 4: Touch Panel Calibration
• 5: Half Damper Calibration
• 6: Update System Software
For more information, please see "Global: Menu Command"
on page 216.
[Off, On]
[Off, On]
[Off, On]
see p. 216
see p. 216
see p. 216
see p. 217
see p. 217
see p. 218
195