090: Reverb2 Spring; 091: Reverb2 Hall; 092: Reverb2 Plate; 093: Reverb2 Room - Korg Krome Parameter Manual

Changing these parameter values allows you to simulate the
type of walls in the room. That is, a larger ER Level
simulates a hard wall, and a larger Reverb Level simulates a
soft wall.
Level
Dry
Pre Delay Thru
Pre Delay

090: Reverb2 Spring

The Reverb2‐type reverbs Reverb2 Spring–Reverb2 Room
have a different sonic character than Rev.Hall–Rev.Room2.
They model the spring reverb systems that are built into
some amps.

091: Reverb2 Hall

This models the reverberation of a concert hall that includes
numerous echo components.

092: Reverb2 Plate

This models a type of reverb unit that vibrates a metal plate
rather than springs. The reverb time is relatively short.
Because the reverberation has a fast attack, it is suitable for
percussive playing.

093: Reverb2 Room

This models the reverberation of a typical room that
includes numerous early reflections.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Right
a Time [sec] 0...100
b High Damp
0...100
[%]
Low Damp
c 0...100
[%]
Pre Delay
d 0...70
[msec]
Dry, 1 : 99...
Wet/Dry
99 : 1, Wet
e Src Off...Tempo
Amt –100...+100
300
Reverb - Room Type
ER
(Early Reflections)
Reverb
Time
Reverb Time
Reverb
Pre Delay
Sets the reverberation time p.300
Sets the damping amount in the
high range
Sets the damping amount in the
low range
Sets the delay time from the dry
sound p.299
Sets the balance between the
effect and the dry input
Selects a modulation source for
Wet/Dry
Sets the modulation amount for
Wet/Dry
Time
In these reverbs, Time is not expressed in seconds, but
instead is a value from 1 to 100. A value of 1 produces the
shortest reverb, and 100 provides the longest reverb.

094: Early Reflections

This effect is only the early reflection part of a reverberation
sound, and adds presence to the sound. You can select one
of the four decay curves.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
EQ Trim
+
EQ Trim
Right
a Type
ER Time
b
[msec]
Pre Delay
c
[msec]
d EQ Trim
Pre LEQ Fc
e
Pre HEQ Fc
Pre LEQ Gain
[dB]
f
Pre HEQ Gain
[dB]
Wet/Dry
g
Src
Amt
a: Type
This parameter selects the decay curve for the early
reflection.
Wet / Dry
Sharp
Wet / Dry
Loose
Modulated
Reverse
Dry
LEQ HEQ
Early Reflections
Pre Delay
Sharp, Loose,
Selects the decay curve for the
Modulated,
early reflection
Reverse
Sets the time length of early
10...800
reflection
Sets the time taken from the
0...200 original sound to the first early
reflection
Sets the input level of EQ applied
0...100
to the effect sound
Selects the cutoff frequency (low
Low,
or mid-low) of the low-range
Mid-Low
equalizer
Selects the cutoff frequency
High,
(high or mid-high) of the high-
Mid-High
range equalizer
–15.0...+15.0 Sets the gain of the Low EQ
–15.0...+15.0 Sets the gain of the High EQ
Dry, 1 : 99... Sets the balance between the
99 : 1, Wet effect and the dry input
Selects a modulation source for
Off...Tempo
Wet/Dry
Sets the modulation amount for
–100...+100
Wet/Dry
Early Reflections - Type
Pre Delay ER Time
Wet / Dry
Wet / Dry
p.300