Korg Krome Parameter Manual page 167

SEQ P10: Pattern/RPPR 10–3: RPPR Setup
Pattern Bank [Preset, User]
Pattern [P000...605, U00...99]
Selects the RPPR pattern for the key selected in KEY. If the
selected user pattern contains no musical data, there will be
no sound when you press that key.
Track [Track 01...16]
Selects the track that will be used for the RPPR pattern
selected for the KEY. When you play the key, the pattern will
be played according to the settings of the track you select
here. You can make track settings in the P0: Play/REC–P5:
MIDI Filter pages.
When you record in real time with the RPPN function
turned on, the data will be recorded on the track you select
here. For more information, please see "Recording an RPPR
performance".
Information shows the bank, name, and number of the
program that's selected for Track.
Information
This area shows the bank, name, and number of the
program that's selected for the track.
Revert
When you press this button, the Pattern (Pattern Bank),
Pattern Select, and Track settings of the last‐edited KEY for
which Assign was checked will be copied to these
parameters of the currently selected KEY.
10–3: Menu Command
V
• 0: Memory Status see p. 163
• 1: Exclusive Solo see p. 64
For more information, please see "Sequencer: Menu
Command" on page 163.
159