Korg Krome Parameter Manual page 238

Media mode
1. If you want to load a pattern other than the selected pat-
tern, use "Pattern" (the upper field) to re-select the pat-
tern that you want to load.
2. Use the "To Pattern" field (the lower field) to specify
the load-destination pattern.
16) Load Global Setting
Global setting data in the .PCG file will be loaded.
This includes Global mode parameters other than drum kits
and arpeggeio patterns.
Memory protect and Effect Global SW settings will not
be loaded.
17) Load .SNG
All data in the .SNG file will be loaded.
1. Use Select .SNG Allocation to specify how the song
data from the .SNG file will be loaded.
Append: The song will be loaded after the last song data
that already exists in internal memory. At this time, the song
data in the .SNG file being loaded will be packed forward.
(See diagram in ".SNG Allocation" on page 228)
Select this when you want to add song data from media
without erasing the song data that currently exists in
internal memory. Cue list data will not be loaded.
Clear: All cue list data and song data currently existing in
internal memory will be erased, and the cue list and song
data will be loaded in the state in which it was saved (See
diagram in ".SNG Allocation" on page 228).
Select this when you want to reproduce the saved state
immediately after power‐on, etc.
2. If a .PCG file of the same filename exists in the current
directory, you can select the "Load ********.PCG too"
check box.
See step 1 of the "1) Load .PCG" on page 228.
18) Load Cue Lists
The cue list data in the .SNG file will be loaded.
19) Load a Song
Data for the selected song will be loaded into the song
number you specified as the load destination.
1. If you wish to load a song other than the selected song,
use Song (upper field) to re-select the song to be
loaded.
2. In To Song (lower field), select the loading destination
song.
230
20) Load Tracks
The event data of all tracks in the selected song will be
loaded into the song you specify as the loading destination.
However, it is not possible to specify an uncreated song as
the loading destination.
In Song, specify the loading destination song.
21) Load Pattern Data
The selected user pattern will be loaded into a user pattern
of the selected loading destination song. However, it is not
possible to specify an uncreated song as the loading
destination.
1. If you wish to load a user pattern other than the one
already selected, use "Pattern" (upper field) to re-select
the user pattern that you wish to load.
2. In "To Song" and "Pattern" (lower field), select the
loading destination song and user pattern.
22) Load Standard MIDI File
The selected Standard MIDI File will be loaded into the song
number you select as the loading destination.
1. In Song, select the loading destination song.
2. If you turn "Exclusive" Off (unchecked), any System
Exclusive messages or Universal Exclusive messages
included in the SMF data will not be loaded.
If this is On (checked), System Exclusive messages and
Universal Exclusive messages included in the SMF data will
be loaded as System Exclusive events.
The GS/XG sound maps and messages are not
supported. Depending on the content of the data, it
may not play back correctly, but the data itself will be
maintained if Exclusive is checked.
If you select an undefined file and choose Load
selected, the file will be assumed to be a Standard MIDI
File, and the Load Standard MIDI File dialog box will
appear. When you execute loading, the file will be
loaded into the song that was specified as the loading