Korg Krome Parameter Manual page 181

Moving a note to a precise location
• You can use the Piano Roll Setup Snap to Grid or Move
Note Resolution settings to easily specify a precise
location. For example if you want to move a note to a
precise timing interval such as
to specify the unit and turn Snap to Grid on. When you
drag a note event, it will snap to the grid. ( See "Piano
Roll Setup dialog box" on page 175.)
Editing a value in the event list
• Choose the tool, and then press the note event that
you want to move. In the event list below, use the VALUE
controllers to enter the desired value.
Note data and velocity values can also be entered by holding
down the ENTER button and playing a note on the
keyboard.
Changing the length of a note
1. Press the tool.
2. Press near the right end of the note event whose length
you want to change.
The note will be highlighted. Continue pressing, and event
information will be displayed in the upper left (or upper
right).
Note: If you select a note event and it turns light blue, a
square will be shown at the right end. The note will turn
green if you press this square.
, use Grid Resolution
2 1
Sequencer: Menu Command Piano Roll
3. Continuing to press the note, drag it left/right.
The note length will change.
If the Piano Roll Setup Snap to Grid setting is on, the length
will change in increments of the Grid Resolution when you
drag it.
Entering a note
1. Press the tool.
2. Press the location at which you want to enter the note.
• A note will be entered. Continue pressing, and event
information will be displayed in the upper left; you can
drag the note to the desired location. The note will be
entered with a velocity of 100.
• To specify the length of the notes that are entered, set the
desired Grid Resolution in the Piano Roll Setup dialog
box.
• To align the note to a precise location, set the desired
Grid Resolution in the Piano Roll Setup dialog box, and
turn Snap to Grid on.
Erasing a single note
1. Press the tool.
2. Press the note that you want to erase. The data will be
erased.
3
2
1
173