Siemens SINAMICS S120 Commissioning Manual page 73

3. Click on button "Select".
Figure 2-10 Setting the interface
4. In the selection list on the left-hand side, select the module that you want to use as the
5. Click the "Install" button.
6. Click on "Close".
Commissioning Manual
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
interface.
The selected module is then listed in the "Installed" list.
You can then check the IP address of the integrated Ethernet interface as follows:
Commissioning
2.2 STARTER commissioning tool
71