Siemens SINAMICS S120 Commissioning Manual page 72

Commissioning
2.2 STARTER commissioning tool
Interface settings in the STARTER commissioning tool
In STARTER, you set communication via PROFINET as follows:
1. Call the menu "Tools > Set PG/PC interface ...".
2. Select the "Access point of the application", and therefore the interface parameter
70
assignment (in the example we use the access point "S7ONLINE (STEP7)" and the
interface parameterization "TCP/IP(Auto)->Belkin F5D 5055").
Figure 2-9 Setting the PG/PC Interface
If the desired interface does not yet exist in the selection list, you can create this.
Commissioning Manual, (IH1), 01/2012, 6SL3097-4AF00-0BP2
Commissioning Manual