5.1 Document Handler Rap - Xerox 3001 Service Manual

5.1 Document Handler RAP
This RAP is used for document handler faults
that do not indicate a status code.
One problem is that the document is not
sensed by the Document Handler.
Q
The circuit diagram is on the next page.
Initial Actions
Ensure that the document is in good
condition.
Procedure
Enter the code [37] to check the Front
document sensor.
NOTE: The Film LED will be lit when the
sensor is blocked.
Actuate the Front Document Sensor (44).
The Film LED goes on then off when the
sensor is actuated.
Y N
Go to
FLAG 1
and check the wiring for a
short circuit. If there is no short circuit to
frame, replace the Front Document
Sensor (44). If the problem persists
replace the Controller PWB (A3).
Proceed to wrap up the call.
/
CONTROL PWB
5.1 Document Handler RAP