Adj 10.1 Fuser Temperature - Xerox 3001 Service Manual

ADJ 10.1 FUSER TEMPERATURE
HOW TO SET UP TEMPERATURE PROBE
2. (FIGURE 2): CONNECT TEMPERATURE
PURPOSE
The purpose is t o adjust the fuser heat for
correct fusing of copies.
TOOLS REQUIRED: DMM, Temperature Probe
Set, Adapter Plugs.
Q
This procedure must be performed
after the machine becomes ready.
PROBE TOTHE DMM.
1. (FIGURE 1): CONNECT THE THERMAL
Q
Ensure that the fuser thermistor RT1
is in positive contact with the fuser
roll
Figure
1.
Connect the Thermal Sensor t o the
Temperature Probe
JACK
TEMPERATURE PROBE
Figure 2. Connect Temperature Probe t o DMM
(Continued)
12/98
3001 4-71
ADJ 10.1