Front Panel Features - Agilent Technologies 85110L User's And Service Manual

Front Panel Features

Figure 3-1 Front Panel Features of 85110L
1. Line Switch. This switch turns the test set on and off. When the side of the switch
labeled is depressed, the test set is off;
0
2. Line LED. This LED indicates the status of line voltage applied to the test set.
3. Active LED. This LED lights about two seconds after power is turned on indicating the
successful completion of self-test, when the test set is the selected test set.
4. Port 1. This test port can transmit RF energy from the source to the DUT and receive
RF energy from the DUT. Under no circumstances should anything be torqued to the
test port connector with greater than 136 Ncm (12 in-lb).
5. a1 LED. This LED indicates source power is switched to port 1.
6. a2 LED. This LED indicates source power is switched to port 2.
7. Port 2. This test port can transmit RF energy from the source to the DUT and receive
RF energy from the DUT. Under no circumstances should anything be torqued to the
test port connector with greater than 136 Ncm (12 in-lb).
Agilent 85110L Test Set
is on.
1
Operation
Front Panel Features
3-3