Aaa Commands - ZyXEL Communications Dimension GS-3012 Cli Reference Manual

C
H A P T E R
Use these commands to configure authentication and accounting on the Switch.
4.1 Command Summary
The following section lists the commands for this feature.
Table 9 aaa authentication Command Summary
COMMAND
show aaa authentication
show aaa authentication enable
aaa authentication enable
<method1> [<method2> ...]
no aaa authentication enable
show aaa authentication login
aaa authentication login
<method1> [<method2> ...]
no aaa authentication login
Table 10 Command Summary: aaa accounting
COMMAND
show aaa accounting
show aaa accounting update
aaa accounting update periodic
<1-2147483647>
no aaa accounting update
show aaa accounting commands
aaa accounting commands
<privilege> stop-only tacacs+
[broadcast]
Ethernet Switch CLI Reference Guide

AAA Commands

DESCRIPTION
Displays what methods are used for authentication.
Displays the authentication method(s) for checking privilege
level of administrators.
Specifies which method should be used first, second, and
third for checking privileges.
method: enable, radius, or tacacs+.
Resets the method list for checking privileges to its default
value.
Displays the authentication methods for administrator login
accounts.
Specifies which method should be used first, second, and
third for the authentication of login accounts.
method: local, radius, or tacacs+.
Resets the method list for the authentication of login accounts
to its default value.
DESCRIPTION
Displays accounting settings configured on the Switch.
Display the update period setting on the Switch for
accounting sessions.
Sets the update period (in minutes) for accounting sessions.
This is the time the Switch waits to send an update to an
accounting server after a session starts.
Resets the accounting update interval to the default value.
Displays accounting settings for recording command events.
Enables accounting of command sessions and specifies the
minimum privilege level (0-14) for the command sessions that
should be recorded. Optionally, sends accounting information
for command sessions to all configured accounting servers at
the same time.
4
M P
E 3
E 3
C 14
C 14
E 3
C 14
C 14
M P
E 3
E 3
C 13
C 13
E 3
C 13
27