Igmp Snooping Commands - ZyXEL Communications Dimension GS-3012 Cli Reference Manual

C
H A P T E R

IGMP Snooping Commands

Use these commands to configure IGMP snooping on the Switch.
See Chapter 23 on page 95
22.1 Command Summary
The following section lists the commands for this feature.
Table 57 igmp-flush Command Summary
COMMAND
igmp-flush
Table 58 igmp-snooping Command Summary
COMMAND
show igmp-snooping
show multicast [vlan]
igmp-snooping
no igmp-snooping
igmp-snooping 8021p-priority <0-
7>
no igmp-snooping 8021p-priority
igmp-snooping host-timeout <1-
16711450>
igmp-snooping leave-timeout <1-
16711450>
igmp-snooping reserved-
multicast-frame <drop|flooding>
igmp-snooping unknown-
multicast-frame <drop|flooding>
show igmp-snooping querier
Ethernet Switch CLI Reference Guide
for IGMP filtering commands.
DESCRIPTION
Removes all multicast group information.
DESCRIPTION
Displays global IGMP snooping settings.
Displays multicast status, including the port number, VLAN ID
and multicast group members on the Switch. Optionally,
displays the type of each multicast VLAN.
Enables IGMP snooping.
Disables IGMP snooping.
Sets the 802.1p priority for outgoing igmp snooping packets.
Disables changing the priority of outgoing IGMP control
packets.
Sets the host timeout value.
Sets the leave timeout value
Sets how to treat traffic with a reserved multicast address.
Reserved multicast addresses are in the range 224.0.0.0 to
224.0.0.255.
Sets how to treat traffic from unknown multicast groups.
Displays the IGMP query mode for the specified port(s).
22
M P
E 13
M P
E 3
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 3
91