Using Intercom As The Line For Autodial - Nortel Compact ICS 7.1 Coordinator Manual

96 / Time savers for making calls
For the 7000 and 7100 digital phones, an external autodialer can be
programmed only by using a line and not a line pool.
Tip -
number, the call uses your prime line (if you have one).
Digital Mobility phones do not support the auto dial feature.

Using intercom as the line for Autodial

If you enter the intercom button as the line for an external autodial number,
you must include a valid line pool access code or a destination code. If line
pool access codes or destination codes are changed, remember to
reprogram autodial numbers.
Displays
987__
QUIT BKSP
Autodial full
Button erased
Enter digits
QUIT
Intercom #: ___
QUIT
Invalid number
Compact ICS 7.1 System Coordinator Guide
If you do not include a line selection in an autodial
Continue to enter digits until the number is
complete. Press
OK
incorrect digit. Press
finished.
The memory allotted to autodial numbers in your
Norstar system is full.
While programming external Autodial, you
erased the button by pressing
entering any digits.
Enter the number you want to program (choosing
the line first if necessary) exactly as you would if
OK
you were making a call.
Enter the internal telephone number you want to
program.
You are programming an internal autodial button
and have entered a number that is not an internal
number on your system. Enter a valid internal
number. If the number you are entering is a
destination code, use external autodial.
√
or BKSP to erase an
≥
or OK when you are
≥
or OK before
N0130955 01