Turning Ccr On Or Off; Choosing The Attendant Telephone - Nortel Compact ICS 7.1 Coordinator Manual

Tip -
System Answer and CCR on or off on a memory button
with an indicator at the attendant telephone. You know
that the feature is turned on when the indicator is lit at the
attendant set.

Turning CCR on or off

Press ≤•°‹¤. The display shows the current status of CCR.
1.
Press CHANGE or £ and enter the System Coordinator password or
2.
Basic password (the default passwords are ¤‹fl›fl and
¤¤‡›¤) to select a setting: OFF, Bus. Open, or Bus. Closed.
Press OK or • to confirm the change.
3.
See the section on recording greetings for a description of the
Business Open and Business Closed greetings used with CCR.

Choosing the attendant telephone

Programming allows you to choose a telephone to be the attendant
telephone (attendant set). External calls that go unanswered at this
telephone are handled by System Answer.
1. Place the programming overlay over the appropriate buttons on your
two-line-display telephone.
Press ≤••¤flfl‹››.
2.
Press ¤‹fl›fl (the default System Coordinator password).
3.
The display shows Terminals&Setsˆ.
Press " twice. The display shows System prgrmingˆ
4.
Press ≠, ', and ≠. The display shows the
5.
internal number of the current attendant telephone.
Press CHANGE and enter the internal number of the telephone you want
6.
to assign as the attendant telephone.
N0130955 01
You can program the feature code for turning
Auto Attendant / 85
≤•°‹¤
Compact ICS 7.1 System Coordinator Guide