Programming Room Information - Nortel Compact ICS 7.1 Coordinator Manual

Programming room information

Use this setting to assign set DNs to a specific room.
1. Place the appropriate programming overlay on the set you are using to
do programming.
Press ≤••¤flfl‹›› (CONFIG). The display shows
2.
Password:.
Press ¤‹fl›fl (ADMIN). The display shows
3.
Terminals&Sets.
Press ' until the display shows Hospitality.
4.
Press ≠ until Room/desk info displays.
5.
Press ≠. Show set: displays.
6.
Enter a room set number or press LIST and press ' until you
7.
find the DN of the set you want to assign to a room.
Press ≠. Room #:None displays.
8.
Press CHANGE and enter the room number, then press OK.
9.
10. Press '. Adm pwd req'd:Y displays
11. Press CHANGE and choose Y or N, depending on your security
requirements.
Call restrns
Call restrictions can be set up by the system administrator. Refer to the
Compact ICS Installer Guide for details.
N0130955 01
Using the Hospitality features / 181
Compact ICS 7.1 System Coordinator Guide