Canceling A Message You Have Sent; Viewing Your Messages - Nortel Compact ICS 7.1 Coordinator Manual

TIP -
analog telephone connected to an Analog Station
Module (ASM) can send messages to analog telephones
by pressing ≤⁄. Depending on the programming
setup, the analog telephone provides either a Stuttered
Dial Tone or a Message Waiting Lamp to inform the user
of messages pending.
For analog telephones connected to an ASM, the
message waiting indicator remains on until the user
invokes ˚£flfi. If the analog telephone has
the Message Reply Enhancement feature set to Yes, the
message waiting indicator is turned off automatically
after the reply call is answered no matter from where the
call is answered.
For more information about the Message Reply
Enhancement feature, see the Norstar Compact ICS 7.1
Installer Guide.

Canceling a message you have sent

Press ≤£⁄. The display shows Cancel for:.
1.
2. Enter the internal number of the person to whom you sent the message.

Viewing your messages

You can receive up to four messages from different telephones, including
your voice message center. A single message from your voice message
center may pertain to several voice messages.
On a telephone with a one-line display
Press ≤flfi. The display shows the first message.
1.
Press • or £ to move through your messages.
2.
N0130955 01
Only the designated direct-dial telephone for an
Communicating in the office / 129
Compact ICS 7.1 System Coordinator Guide
≤flfi