Allowing A Telephone To Redirect Calls; Turning The Redirect Ring For A Telephone On Or Off - Nortel Compact ICS 7.1 Coordinator Manual

Allowing a telephone to redirect calls

You can turn the redirect calls feature on and off.
1. Place the programming template over the appropriate buttons of the
programming telephone.
Press ≤••¤flfl‹››.
2.
Press ¤‹fl›fl (the default System Coordinator password).
3.
Press ≠ and enter the internal number of the telephone you
4.
want to program.
Press ≠ twice.
5.
Press " three times. The display shows Allow redirect:.
6.
Press CHANGE to select Y (Yes) or N (No).
7.

Turning the redirect ring for a telephone on or off

You can program a telephone to ring briefly (200 milliseconds) when a call
is redirected on one of its lines.
1. Place the programming template over the appropriate buttons of the
programming telephone.
Press ≤••¤flfl‹››.
2.
Press ¤‹fl›fl (the default System Coordinator password).
3.
Press ≠ and enter the internal number of the telephone you
4.
want to program.
Press ≠ twice.
5.
Press " twice. The display shows Redirect ring:.
6.
Press CHANGE to select Y (Yes) or N (No).
7.
Tip -
briefly for redirected calls on one of its lines even if
another telephone set up the line redirection.
N0130955 01
If a telephone has redirect ring enabled, it rings
Forwarding your calls / 121
Compact ICS 7.1 System Coordinator Guide