Using Set lock
Set lock limits the ways in which you can customize your telephone. There
are three levels of Set Lock: Full, Partial, and None (no set lock). With
no set lock, you have access to all features on your telephone.
Partial prevents:
• programming autodial
buttons
• programming user speed dial
numbers
• programming feature buttons
• moving line buttons
• changing the display
language
Full, in addition to the restrictions outlined for Partial lock, prevents:
• changing Background Music
• changing Privacy
• changing Do Not Disturb
• using Ring Again
Changing Set Lock programming for a telephone
1.
Place the programming template over the appropriate buttons of the
programming telephone.
Press ≤••¤flfl‹››.
2.
Press ¤‹fl›fl (the default System Coordinator password).
3.
Press ≠ at Terminals&Sets and enter the internal number of
4.
the telephone you want to program.
Press ≠.
5.
Press ' until the display shows Restrictions.
6.
Press ≠ twice.
7.
Use CHANGE to select one of the three options: None, Partial and
8.
Full.
N0130955 01
Using System features / 223
• changing dialing modes
(Automatic Dial, Pre-Dial,
and Standard Dial)
• using Voice Call Deny
• saving a number with Saved
Number Redial
• using Call Forward all calls
• using Send Message
• using Trunk Answer
• activating Services
Compact ICS 7.1 System Coordinator Guide