Large Delivered Sheets Are Not Stacked Properly - Ricoh Pro C9100 Operating Instructions Manual

9. Post-Processing Option Troubleshooting
There are too many stacked sheets.
Reduce the number of the stacked sheets. To do this, suspend printing and remove the stacked sheets,
and then resume printing.
To suspend printing, press the [Suspend/Resume] key on the finisher.
To resume printing, press the [Suspend/Resume] key on the finisher.
Thin coated paper is used.
When stapling thin coated paper, the stapled sheets may be scratched or they may jam.
In the 03: [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Skilled Operators]
menu, set 0301: [Adjust Paper Curl] to "Adjust
if the present setting is "Off", "Medium" if the present value is "Weak", or "Strong" if the present value is
"Medium".

Large Delivered Sheets Are Not Stacked Properly

Cause:
When using large-size or coated and paper-to-paper friction is very high, a sheet may push against
another or paper deflection may occur.
This may occur if:
1
• B4 , 8 / " × 14" , or larger size of paper is used.
2
• Paper that produces high paper-to-paper friction is used.
• The temperature or humidity is high.
Sheet bending
The leading edge of the delivered sheet bends upward and backward.
Output tray
One sheet pushing out another
Because of high paper friction, the delivered sheet may get stuck and push out other sheets of
paper.
126
Paper exit
Paper feed direction
CEZ594
Curl". To control the level of decurling, select "Weak"