2.
Print the image. Has the problem been resolved?
Yes
Finished!
No
Increase the temperature an additional 5 degrees in 088: [Fusing Temp: FC] or 089:
[Fusing Temp: BW].
3.
Print the image. Has the problem been resolved?
Yes
Finished!
No
Set 096: [Cleaning Web Rotation Interval] to "-75 %".
4.
Print the image. Has the problem been resolved?
Yes
Finished!
No
Set 093: [Fusing Pressure Roller On Before Fusing] to [Off].
5.
Print the image. Does this eliminate the problem?
Yes
Finished!
No
Go to the next step.
6.
Adjust the pressure roller temperature.
<Printing in full color>
Set the value in 090: [Fusing Pressure Roller Temp: FC] to "130 degrees".
<Printing in black and white>
Set the value in 091: [Fusing Pressure Roller Temp: BW] to "130 degrees".
7.
Print the image. Has the problem been resolved?
Yes
Finished!
No
Set the value in 127: [Paper Feed Interval Setting] to "70 %".
8.
Print the image. Has the problem been resolved?
Yes
Finished!
No
Contact your service representative.
• Decreasing the value in 096: [Cleaning Web Rotation Interval] will shorten the replacement cycle
of the cleaning web.
Spots
59