Ricoh Pro C9100 Operating Instructions Manual page 177

To feed A3 paper with its long side parallel to the paper feed direction, increase the value by
0.025 percentage point to move the image by approximately 0.07 mm (0.0028 inches).
When to check for misregistrations on the front and back of the paper
Check for misregistrations on the front and back of the paper when:
• Using paper of a different lot, means of acquisition, or storage condition
• Changing an advanced fusing settings
• The machine's ambient temperature has changed drastically. For instance, the machine's
adjustment values and settings are checked in summer while the machine is used in winter)
• Changing the paper size in a custom paper preset
• Registering a custom paper preset based on an already registered custom paper preset
Adjusting the Image Position of the Either Side of the Paper
DFT321
175