Ricoh Pro C9100 Operating Instructions Manual page 173

Entering the Value
When you specify the lengths of the template after measuring them, the values to adjust the image
position are automatically calculated and applied.
1. In [Advanced Settings] for the custom paper, select [Registration to Align Front and Back
Images Using Template].
2. Enter the value you wrote on the printed template.
Select the item, enter the value using the number keys, and then press [ ].
You can enter values from 0.1 to 999.9 mm in 0.1-mm increments.
3. Press [OK].
4. Press [Exit].
5. Press [OK].
6. Press [Overwrite].
7. Press [Yes].
8. Press [Exit].
Checking Adjusted Results
1. From the supplied CD, print the file of the format matching the size of the paper requiring
image position adjustment. Continuously print the format on both sides of 10 sheets.
2. Using the 6th sheet among the printed copies, check whether any misregistration occurs
on the front and back of the paper.
• When using thin paper, check for misregistration by seeing through the paper.
• When using thick paper or paper that cannot be seen through, pierce the paper with a tool
such as an eyeleteer and check for misregistration.
3. After adjusting the position, return the values in the following settings to those checked in
page 169 "Preparation".
013: [Erase Margin: Leading Edge]
Adjusting the Image Position of the Either Side of the Paper
171