Ricoh Pro C9100 Operating Instructions Manual page 57

No Decrease the value in 087: [Ppr Trns High Pressure Setting] by 1 step. If [High] is
selected, change the value to [Standard]. If [Standard] is selected, change the value to
[Low]. If [Low] is selected, change the value to [Off].
5. Print the image. Has the problem been resolved?
Yes Finished!
No Repeat Steps 3 to 5. If the problem persists even though you have set 084: [Ppr Trns
Gap] to [Large Gap], contact your service representative.
Bands
55