Ricoh Pro C9100 Operating Instructions Manual page 174

11. Advanced Instructions
014: [Erase Margin: Trailing Edge]
Eliminating misregistrations on the front and back of the paper
Adjust the image position and magnification on Side 2 to match those on Side 1. Carry out the following
sequence of procedures. Terminate the sequence as soon as the problem is resolved.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Registering a Custom Paper", Paper Settings.
1. From the supplied CD, print the file of the format matching the size of the paper requiring
image position adjustment. Continuously print the format on both sides of 10 sheets.
Use the 6th sheet among the printed copies for adjustment.
2. Through visual inspection of the 4th, 5th, and 6th sheets, check that misregistrations on
Side 1 and 2 are almost the same.
If not, adjust the misregistrations according to the usual method.
3. In [Advanced Settings] for the custom paper, select 002: [Image Position: Across Feed:
Side 2] and adjust the vertical position of the image to be printed on Side 2 of the paper
to match the image position on Side 1.
Eg., Adjusting the center line of the leading edge on Side 2 (a) to match the center line (b) on Side
1
Press [−] to shift the image to the bottom. (Press [+] to shift the image to the top.)
172
DFT314