Ricoh Pro C9100 Operating Instructions Manual page 82

7. Image Quality Problem: Full Page
Cause:
This may occur if:
• Heavily textured paper is used.
• Thick paper is used.
• Documents with a small image area are printed continuously.
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Registering a Custom Paper", Paper Settings.
Solution:
Adjust the paper transfer roller voltage.
1. In [Advanced Settings] for the custom paper, increase the value in 043: [Paper Transfer
Current: FC: Side 1] or 044: [Paper Transfer Current: FC: Side 2] by -20 A.
Eg., -100 A to -120 A
2. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
3. Does other than black become faint?
Yes Finished!
No Go to the next step.
80
CXM001