Ricoh Pro C9100 Operating Instructions Manual page 71

(B) The density is uneven in a part of the image.
Affected area
The leading edge is fainter.
The trailing edge is fainter.
The area within 90 mm (3.5 inches) of the trailing
edge is fainter or denser.
The center is fainter or denser
1. In the 02: [Machine: Image Quality] group
on the [Adjustment Settings for Skilled
Operators] menu, select 0201: [Adjust
Image Density/ DEMS] and execute [Image
Density Adjustment: Manual Execute].
2. If the problem persists, contact your service
representative.
cez555
When thick paper is used, see page 70
"Density Fluctuation at the Leading Edge (When
Using Thick Paper)".
1. In the 02: [Machine: Image Quality] group
on the [Adjustment Settings for Skilled
Operators] menu, select 0201: [Adjust
Image Density/ DEMS] and execute [Image
Density Adjustment: Manual Execute].
2. If the problem persists, contact your service
representative.
cez556
When thick paper is used, see page 73
"Density Fluctuation at the Trailing Edge (When
Using Thick Paper)".
1. In the 02: [Machine: Image Quality] group
on the [Adjustment Settings for Skilled
Operators] menu, select 0201: [Adjust
Image Density/ DEMS] and execute [Image
Density Adjustment: Manual Execute].
2. If the problem persists, see page 78
"Uneven Density within 107 mm (4.2 inches)
of the Trailing Edge".
cez557
1. In the 02: [Machine: Image Quality] group
on the [Adjustment Settings for Skilled
Operators] menu, select 0205: [Adjust
Density Difference Across Feed Direction]
and execute the auto adjustment for the
affected color.
2. If the problem persists, contact your service
cez558
representative.
Uneven Density
Solution
69