Operation
Information
With the thread supply in the reserve groove it is ensured that the pocket
opening can be safely finished after the remaining thread monitor has
produced the message Error 3220
Important
Keep the reflecting surface (5) of the bobbin clean.
7. Press the bobbin flap (3) against the bobbin (4).
The winder starts up.
Information
The winder stops automatically when the configured bobbin filling volume
has been reached. The setting of the bobbin filling volume is described in
the Service Instructions.
4.8 Changing the bobbins
Fig. 10: Changing the bobbins (1)
(1) - Bobbin case upper section
To change the bobbins:
1. Switch off the machine.
2. Swivel the folding station to the side ( p. 16).
3. Raise the fabric sliding plate and swivel it to the left.
4. Lift the bobbin case upper section (1).
The bobbin case retainer (2) will be lifted as well.
5. Remove the bobbin case upper section (1) together with the empty
6. Remove the empty bobbin from the bobbin case upper section (1).
Operating Instructions 745-35-10 D - 00.0 - 04/2017
①
②
bobbin.
(bobbin empty).
(2) - Bobbin case retainer
23