DURKOPP ADLER 745-35-10 D Operating Instructions Manual page 55

Programming
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Menu item
5.1.15 Stacker/smoother/blow-off/roll-off
5.1.15.1 Select clamping time
5.1.15.4 Lift transport clamp after corner cut
5.1.15.6 Roll-off: Time after corner cut
5.1.15.7 Time after roll-off until lift-up
5.1.15.8 Roll-off Time
5.1.15.9 Roll-off Speed
Select patterned/plain goods
5.2 Global parameters
5.2.1 Set positioning point seam begin./center/end
5.2.1.1 Set positioning point seam begin.
5.2.1.2 Set positioning point seam center
5.2.1.3 Set positioning point seam end
5.2.2 Adjust transport clamp
5.2.2.2 Clamp down: Time to next action
5.2.2.3 Speed to corner knife position
5.2.2.4 Speed to waiting position
5.2.2.6 Delay till clamp moves to seam begin.
5.2.6 Adjust corner knife
5.2.6.1 Set cutting duration
5.2.6.3 Time: Corner cut until clamp forward
5.2.7 Maximum hook thread counter
5.2.7.2 Set remaining thread counter
Hook thread monitor On/Off
5.2.11 Set machine process speed
5.2.18 Set password protection
5.2.19 Special function
5.2.19.1 Set time for breast welt pocket clamp
Pick-up folder mode On/Off
5.2.19.3 Set time for clamping the breast welt pocket automatically
5.2.19.4 Time: Set enable pocket bag
Set counting direction of piece counter
Option/described
in chap.
 p. 113
 p. 113
 p. 113
 p. 114
 p. 114
 p. 114
 p. 114
 p. 76
 p. 126
 p. 126
 p. 126
 p. 126
 p. 128
 p. 128
 p. 128
 p. 128
 p. 128
 p. 126
 p. 126
 p. 126
 p. 126
 p. 126
 p. 130
 p. 126
 p. 129
 p. 127
 p. 127
 p. 127
 p. 127
 p. 127
 p. 127
53