Table of Contents
Advertisement
The display switches to Data transfer from USB.
Fig. 131: Data transfer from USB
To read data from the USB key to the system:
1. Select which data you wish to store in the control:
166
Reading data from the USB key to the system
NOTICE
Property damage may occur!
The machine will not work if you load data from a wrong class.
Loading data from an incorrect class will generate irregular error
messages.
Check the class before loading Machine configuration or All data.
After loading Machine configuration or All data, check the class and
the configuration in the Machine configuration menu.
• Current seam program
• All seam programs
• All seam programs and sequences
• Global parameters
• Machine config.
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Programming
Advertisement
Table of Contents
