Basic operation
The menu items of the software are numbered. For a quick overview, refer
to the table included in the chapter Software quick access ( p. 49).
Fig. 38: Basic operation
(1) - Pocket programs in sequence
(2) - Automatic seam sequence
(3) - Overview of seam sequences
(4) - Piece counter
(5) - Seam pattern
(6) - Positioning points
(7) - Quick selection corner knife correction
The control panel is controlled via a touch pad. The start screen is divided
into the areas below:
56
④
⑤
⑥
⑦
No.
Control panel
①
②
③
④
⑤
③
⑧
(8) - Info field
(9) - Toolbox
(10) - Help
(11) - User password
(12) - Service menu
(13) - Program parameters
Description
Display of pocket programs in
sequence
Automatic seam sequence
On/Off
Edit seam sequence
Piece counter
Display of selected seam pattern
• the display changes with the
setting of the pocket program
(with/without flap).
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Programming
②
①
⑬
⑫
⑪
⑨
⑩
p. 74
p. 61
p. 60