DURKOPP ADLER 745-35-10 D Operating Instructions Manual page 106

 The display switches to Waiting position of transport
Fig. 80: Set waiting position of transport clamp
Symbols
To set the waiting position of the transport clamp:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
104
Set waiting position of transport clamp
clamp.
Meaning
Waiting position of transport clamp On/Off
Set up to waiting pos. of transport clamp
• 1 mm - 515 mm
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Programming