Fig. 7: Left needle thread
(3) - Thread lever
(4) - Thread advancing device
(5) - Guide
(6) - Needle thread monitor
(7) - Guide
(8) - Hole
4. Insert the needle thread in a wavelike manner through the left holes (13)
5. Feed the needle thread through the guide (12).
6. Guide the needle thread counterclockwise around the tensioner (11).
7. Guide the needle thread clockwise around the tensioner (10).
8. Feed the needle thread through the thread tension spring (9).
9. Insert the needle thread through the hole (8) in the mounting plate.
10. Insert the needle thread through the upper hole in the thread lever (3).
11. Feed the needle thread through the thread advancing device (4).
12. Feed the needle thread through the needle thread monitor (6).
13. Feed the needle thread through the guide (7).
14. Feed the needle thread into the left needle.
Right needle thread
To thread the right needle thread:
1. Swivel the folding station to the side ( p. 16).
2. Fit the thread reel on the reel stand (1).
3. Feed the thread from the thread reel through the holes (2).
20
③
④
⑤
⑥
⑦
in the mounting plate, as shown above.
⑧ ⑨
(9) - Thread tension spring
(10) - Tensioner
(11) - Tensioner
(12) - Guide
(13) - Holes
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Operation
⑬
⑫
⑪
⑩