DURKOPP ADLER 745-35-10 D Operating Instructions Manual page 177

Programming
Information
To set up a user password, the user password option must be activated in
the Global parameters ( p. 129).
If a user password already exists, you need to enter this password before
you can create a new user password.
To activate password protection, you need to restart the machine.
When the machine starts up, you will be prompted to enter the user pass-
word you created.
Fig. 138: User password setup (1)
To set up a user password:
1. Enter the desired 4-digit PIN.
2. Confirm with OK.
3. Re-enter the password (password check)
4. Confirm with OK.
Operating Instructions 745-35-10 D - 00.0 - 04/2017
User password setup
175