Table of Contents
Advertisement
Programming
Symbol
To test the machine:
1. Press the desired button.
The user interface for setting the desired item is displayed.
USB_Logging
USB_Logging is used to perform on error analysis of the OP7000.
To carry out USB Logging:
1. Create a Log.txt file.
2. Load the Log.txt file onto a USB key.
3. Plug the USB key with the Log.txt file into the USB port.
4. Confirm with OK.
USB_Logging automatically writes all status messages of the
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Description
Test tape feeder
•
Tape throwing
•
Tape trimming
Machine workflow test p. 139
Test step motor p. 143
Adjust and test control panel p. 145
Test pick-up folder
•
Pick-up folder depressurized On/Off
•
Pick-up folder left/right
•
Pick-up folder up/down
OPO7000 to the Log.txt file until the machine is switched off.
131
Advertisement
Table of Contents
