DURKOPP ADLER 745-35-10 D Operating Instructions Manual page 115

Programming
Stacker/smoother/blow-off/roll-off
 The display switches to Stacker/smoother/blow-off/roll-off.
Fig. 87: Stacker/smoother/blow-off/roll-off
Symbols
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Meaning
Stacker On/Off
• only with active throw-over stacker or pincer stacker  p. 117
Set the duration grip stacker signal
• only with active pincer stacker  p. 117
• 0 ms - 1000 ms
Select earlier clamping time
• 0 ms - 1000 ms
Smoother On/Off
• only with active smoother  p. 117
Set smoother: Start after corner cut
• only with active smoother  p. 117
• 0 ms - 1000 ms
Set delayed lifting of transport clamp after corner cut
• 0 ms - 1000 ms
Blow-off On/Off
• only with active blow-off  p. 117
Set the duration for which the blow-off will be blowing
• only with active blow-off  p. 117
• 0 ms - 1000 ms
Roll-off On/Off
113