Assembling The Cylinder For The Pick-Up Folder Stroke - DURKOPP ADLER 745-35-10 D Operating Instructions Manual

To assemble winder and tray:
1. Slide the holder (6) on the bracket (5) onto the tabletop.
2. Assemble the bracket (5) in place on the tabletop.
3. Align arms (2) and (4).
4. Assemble the tray (3) to the arm (4).
5. Assemble the winder (1) to the arm (2).

7.6.4 Assembling the cylinder for the pick-up folder stroke

Fig. 160: Assembling the cylinder for the pick-up folder stroke
(1) - Screws
(2) - Plate
To assemble the cylinder for the pick-up folder stroke.
1. Swing the cylinder upward.
2. Tighten the cylinder retainer (3) to the plate (2) using the screws (1).
3. Move the mounting plate for the pick-up folder by hand.
 The movement must be smooth along the entire length of the cylinder
Correcting the setting of the cylinder retainer
4. Loosen the screws (1) and move the mounting plate for the pick-up
 The cylinder retainer aligns itself.
200
①
②
stroke.
folder along the entire length of the cylinder stroke.
(3) - Cylinder retainer
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Setup
③