Programming
Symbols
To set the corner knife parameters:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Fig. 76: Set corner knife correction seam begin./seam end
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Meaning
Seam end outer right On/Off
Correction seam end left
• -9.9 mm - 9.9 mm
Correction seam end right
• -9.9 mm - 9.9 mm
Set corner knife correction seam begin./seam end
99