Table of Contents
Advertisement
To set the working height:
1. Loosen the screws (1).
2. Set the tabletop to the desired working height.
3. To avoid jamming, slide the stand tubes in or out evenly on both sides.
4. Tighten the screws (1).
7.6 Assembling the machine parts removed for shipping
7.6.1 Assembling the reel stand
Fig. 157: Assembling the reel stand
(1) - Hole
(2) - Reel plate
To assemble the reel stand:
1. Insert the reel stand (3) into the hole (1) in the tabletop and assemble
2. Mount and align the reel plate (2) and the unwinder arms (4) as shown
198
it with the nut below the tabletop.
in the figure.
④
③
②
①
(3) - Reel stand
(4) - Unwinder arms
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Setup
Advertisement
Table of Contents
