Maintenance - DURKOPP ADLER 745-35-10 D Operating Instructions Manual

Maintenance

6
This chapter describes maintenance work that needs to be carried out on
a regular basis to extend the service life of the machine and achieve the
desired seam quality.
Advanced maintenance work may only be carried out by qualified special-
ists ( Service Instructions).
Maintenance intervals
Work to be carried out
Removing lint and thread remnants
Clean the lenses of the light barriers
Checking the water level
Topping off the oil
Check the pneumatic system
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Maintenance
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Operating hours
8 40 160 500





183