DURKOPP ADLER 745-35-10 D Operating Instructions Manual page 94

 The display switches to Soft start parameters.
Fig. 69: Soft start parameters
Symbols
To edit the soft start parameters:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
92
Set soft start parameters
Meaning
Soft start On/Off
Set soft start speed
• 100 RPM - 1500 RPM
Set number of stitches for soft start
• 1 - 20
Number of stitches for loosening the needle thread clamp
• 1 - 20
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Programming