Setup; Checking The Scope Of Delivery; Removing The Transport Locks - DURKOPP ADLER 745-35-10 D Operating Instructions Manual

Setup

7

7.1 Checking the scope of delivery

The scope of delivery depends on your specific order. Check that the
scope of delivery is correct after taking delivery.

7.2 Removing the transport locks

Remove all transport locks before setting up the machine:
Important
If you wish to transport the sewing unit to a different location, you have to
attach the transport locks again.
When removing/fitting the transport locks, also observe the information
given in the supplementary sheet included with the machine.
Operating Instructions 745-35-10 D - 00.0 - 04/2017
Setup
WARNING
Risk of injury from cutting parts!
Cutting injuries may be sustained while unpacking
and setting up the machine.
Only qualified specialists may set up the machine.
Wear safety gloves.
WARNING
Risk of injury from moving parts!
Crushing injuries may be sustained while
unpacking and setting up the machine.
Only qualified specialists may set up the machine.
Wear safety shoes.
• Transport carriage
• Method plate
• Corner knife station
• Feeder
• Assembly groups, e. g. stacker
193