Archiving A Project On The Compactflash Card (Zip File) - Siemens SIMOTION D410 Commissioning Manual

Commissioning (software)
5.2 Configuring the system in offline mode
● In the object comparison, it is possible to establish consistency in sources and technology
● Consistency can be established for the entire Control Unit by loading from the CF card with
Additional references
Detailed information on loading data to the target device can be found in the
Runtime Basic Functions Function Manual.
5.2.7

Archiving a project on the CompactFlash Card (zip file)

Procedure
In SIMOTION SCOUT, you can save the project as a *.zip file to the CF card.
Proceed as follows to archive the SIMOTION project on the CF card:
1. Open SIMOTION SCOUT and select the "Project" > "Archive" menu command.
2. In the "Archive" dialog box, select the SIMOTION project and save it to your drive (PG/PC).
3. Open the project.
4. Go online to SIMOTION D410.
5. In the project navigator, select the SIMOTION D410 and select the "Target system" > "Load"
6. In the dialog that is displayed, select the project and click "Open". This saves the project
Additional references
Detailed information on loading data to the target device can be found in the
Runtime Basic Functions Function Manual.
92
objects on an object-granular basis.
"Target system" > "Load" > "Load CPU / drive unit to PG...."
> "Save archived project to card..." menu command.
to the CF card as Project.zip in the directory USER\SIMOTION\HMI\PRJLOG.
Note
If you want to load the current project from the card, select the "Target system" > "Copy
archived project from card to PG/PC..." menu command.
Prerequisite is that you have backed up the project with "Save archive project on card..."
each time a change was made.
SIMOTION
SIMOTION
SIMOTION D410
Commissioning Manual, 04/2014