Maintenance and service
6.1 Overview
Alternative: Load the project to the CF card using a card reader
1)
See Software compatibility list (http://support.automation.siemens.com/WW/view/en/18857317)
2)
The versions of SINAMICS Integrated and Controller Extensions are upgraded automatically in the HW Config during
3)
device replacement
The technology packages are updated automatically. The user can directly specify a TP
4)
SINAMICS components are upgraded/downgraded to the component version of the CF card. Observe the LED codes!
5)
After the upgrade it is necessary to switch the device off and on.
Figure 6-1
Overview of upgrade options
166
SIMOTION D410
Commissioning Manual, 04/2014