Siemens SIMOTION D410 Commissioning Manual page 109

Requirements
● The project has been downloaded to the target system.
● SIMOTION SCOUT is in online mode.
● The drive is not being used by a current project in RUN mode.
Testing a drive with the drive control panel
1. Change to the configured drive in the Project Navigator and open the drive control panel
Figure 5-16
2. To display the control area and axis diagnostics, click the "Show/hide control area" and
3. Click "Assume control priority". The "Assume Control Priority" dialog box is opened.
SIMOTION D410
Commissioning Manual, 04/2014
WARNING
Danger to life from unexpected movement of driven machine parts
Make sure this presents no hazard to personnel or property.
by selecting "Commissioning" > "Control panel". The drive control panel opens in the detail
view.
Drive control panel
"Show/hide diagnostics area" buttons.
Figure 5-17 Assuming control priority
5.5 Testing the configured drive using the drive control panel
Commissioning (software)
109