Quick Setup Submenu - Extron electronics IN1806 Series User Manual

Quick Setup Submenu

Figure 18.
The
Quick Setup
provides quick access to frequently-used settings. This submenu contains the following
items, which also appear on other submenus in the system:
INn: Input Mode — Displays the video format (such as HDMI or DisplayPort) of the
•
connected input.
• INn: EDID — Press the ƒ and „ buttons to select the resolution or the rate list. Press
>
the
from the resolutions list matches the current output resolution. There are also 10 custom
options, prefaced by
Output Rate — Press the
•
and refresh rates (see
There are 10 custom options, prefaced by
1080p @ 60 Hz
• Audio Mute — Press the
( ) for the audio. The default is
Off
• Test Pattern — Press the
test patterns off (see
available test pattern selections are
,
Bars
DHCP Mode — In DHCP mode, the unit is assigned an IP address when it connects to
•
the network. Press the
( ) DHCP mode. The default is
Off
IP Address — Press the ƒ and „ buttons to switch between octets. Press the
•
>
and
192.168.254.254.
Quick Setup Submenu
submenu is displayed by default when the OSD is first opened, and
and < buttons to navigate through the selected list. Selecting
through
C1 C10
>
and
Output Rate
.
>
and
>
and
Test Pattern
, and
Grayscale Audio Test
>
and < buttons to toggle between enabling (
< buttons to change the value of a selected octet. The default address is
IN1806 and IN1808 Series Scaling Presentation Switchers • Operation
.
< buttons to select from a list of output resolutions
on the submenu beginning on page 36).
Output
through . The default setting is
C1 C10
<
buttons to toggle between mute (
.
Off
< buttons to select a test pattern to display, or to turn
on the OSD submenu on page 40). The
Advanced
,
Crop Alternating Pixels
(pink noise). The default setting is
.
Off
(the default)
Auto
) and unmute
On
, ,
Crosshatch Color
.
Off
) and disabling
On
30