Table of Contents
Advertisement
Command
Output Configuration (continued)
Screen Saver (Enabled when there is no active video on selected input)
Set mode
View mode
Set screen saver duration
before output sync timeout
View screen saver duration
before output sync timeout
View screen saver status
OSD Menu Duration
Set OSD duration
View OSD duration
KEY:
X2*
= Output sync or OSD menu timeout
X4)
= Screen saver mode
X6#
= Screen saver status
Logos
User-supplied Image
Select image file
NOTES:
•
The file name must include the extension (.png, .bmp, .jpg, .gif, .tif, and so on).
•
If the logo file is not in the /Graphics directory, include a / before the filename to indicate that it is in the root directory.
Example: /Logo123.bmp.
View selected logo file
KEY:
X4#
= User logo number
IN1806 and IN1808 Series Scaling Presentation Switchers • SIS Configuration and Control
ASCII Command
Response
(Host to Scaler)
(Scaler to Host)
E
X4)
}
M1*
SSAV
SsavM1*
E
}
X4)]
M1 SSAV
E
X2*
}
T1*
SSAV
Ssav T1*
E
}
X2*]
T1SSAV
E
}
X6#]
S1SSAV
Verbose modes 2 and 3:
Ssav S 1*
EX2*
}
MDUR
Mdur
E
}
X2*]
MDUR
Number of seconds before output sync or the OSD menu times out.
1 through 500 seconds, in 1-second increments
0 =
60 = Default for the MDUR command.
501 = Output sync never times out (default for SSAV command).
1 = Black screen (default)
2 = Blue screen with OSD text
3 = User image on black screen
0 = Active input detected, timer not running
1 = No active input, timer running, output sync still active
2 = No active input, timer expired, output sync disabled
E
X4#
}
A
,<filename> LOGO
LogoA
E
X4#
}
A
LOGO
<filename>
1 through 16. The response is three digits padded with leading zeros.
101 = A No Signal user logo is displayed.
201 = A user-assigned HDCP logo is displayed.
Additional Description
X4)]
Set the screen saver mode for the
output to
View the screen saver mode
output. Default = 1 (black).
X2*]
Set the screen saver timeout duration to
X2*
seconds. Default = 501 (never).
View screen saver timeout duration
View screen saver status
X6# ]
X2*]
Set the OSD menu duration to
View the OSD menu duration.
Output sync is instantly disabled with no active video from the
selected input (not allowed for MDUR command).
X4#
]
Assign logo <filename> to logo slot
,<filename>
X4#
.
]
View the filename assigned to logo
X4)
.
X4)
for the
X2*
.
X6#
.
X2*
.
X4#
.
70
Advertisement
Table of Contents
