Extron electronics IN1806 Series User Manual page 91

Scaling presentation switchers, scalers
Table of Contents

Advertisement

Command
IP Control Port Commands (continued)
IP Setup (continued)
Set the port timeout
View current port timeout
Set the global port timeout
View global port timeout
View MAC address
Set LAN IP address,
subnet mask, and gateway
address
24
NOTE:
Setting any values with a CISG command changes the DHCP setting to Off and the Cisg response is followed by
Boot2 response (when in
View all IP settings
KEY:
X1)
=
On or off, enable or disable
X6$
= Port timeout
X8&
=
IP address
X8*
=
Gateway address
X8(
=
Subnet mask
X9)
=
Hardware (MAC) address
X9#
=
Subnet mask in CISG commands
IN1806 and IN1808 Series Scaling Presentation Switchers • SIS Configuration and Control
ASCII Command
Response
(Host to Scaler)
(Scaler to Host)
E
X6$
}
0*
TC
Pti0*
E
}
X6$]
0TC
E
X6$
}
1*
TC
Pti1*
E
}
X6$]
1TC
E
}
X9)]
CH
erbose modes 2 and 3:
V
Iph
E
X8&
X9#
X8*
}
1*
/
*
CISG
Cisg 1*
verbose mode 2 or
3).
E
}
X8&
1CISG
/
0 = DHCP disabled (default), 1 = DHCP enabled
Time in increments of 10 seconds before the port connections time out.
1 (10 seconds) through 65000 (650,000 seconds)
Default = 30 (300 seconds)
Format nnn.nnn.nnn.nnn (192.168.254.254 = default)
Leading zeros in each of the four octets are optional in setting values,
and are suppressed in returned values.
nnn.nnn.nnn.nnn (0.0.0.0 = default)
nnn.nnn.nnn.nnn (255.255.255.0 = default)
00-05-A6-xx-xx-xx
Prefix representing subnet mask bits (subnet mask value in CISG
commands).
Default = /24, which represents the default subnet mask,
255.255.255.0.
Additional Description
X6$]
Set the amount of time in increments of
10 seconds before the port connection
times out.
View the set connection timeout of the
current port.
X6$]
Set the amount of time in increments of
10 seconds on all IP connections to this
device before the port connection times
out.
View the set timeout of all IP port
connections.
View unit Media Access Code (MAC)
address
• X9)]
X8&
X9#
X8*]
/
*
Set the IP address to
port (1), the subnet mask prefix to /
and the gateway address to
same time.
X9#
X8*]
View the IP address, subnet mask
*
(prefix), and gateway address for the
unit.
X9)
.
X8&
for the LAN
X9#
X8*
at the
,
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

In1808 seriesIn1806In1808In1808 ipcp saIn1808 ipcp ma 70

Table of Contents